OY132B 32ton Hydraulic Car Bottle Jack

Industry Knowledge

How to operate the oy132b-32ton-hydraulic-car-bottle-jack correctly to ensure its safe use?

OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK is an efficient and powerful hydraulic jack, widely used in automobile maintenance, engineering operations and other fields. In order to ensure safety during operation, users must strictly follow the correct operating procedures.

1. Preparation before use
Check whether the appearance of the jack is intact and there are no signs of damage such as cracks or deformation. Pay special attention to check whether the connection between the hydraulic cylinder and the base is tight to ensure there is no oil leakage. Clean the working area of the jack to ensure that the ground is flat and free of debris to avoid accidents caused by uneven ground or interference from debris during operation. Check whether the rated load of the jack meets the working requirements. Do not overload it to avoid equipment damage or personal injury.

2. Correct operation steps
Place the jack under the object that needs to be lifted, making sure that the base of the jack is in smooth contact with the ground, and that the top of the jack is in close contact with the lifted object. Open the oil drain valve of the jack to allow the oil in the hydraulic cylinder to flow back to the tank. At this time, the jack is in the lowest position. Use a hand or electric pump to pump oil into the hydraulic cylinder, gradually raising the jack. During operation, maintain smooth strength and avoid sudden or excessive force. When the jack reaches the required height, close the oil drain valve and lock the jack in position. At this point, relevant repair or installation work can be carried out.
After the work is completed, open the drain valve and allow the jack to slowly lower. Be careful to maintain control of the jack during the descent to avoid sudden falls.

3. Precautions for use
During operation, be sure to keep the jack stable to prevent it from tipping or sliding. If necessary, use supports to secure the jack. It is strictly prohibited to overload the jack to avoid damage to the equipment or safety accidents. When the load size is uncertain, a trial lift should be performed first to ensure safety.
During use, if you find that the jack makes abnormal noises or leaks oil, you should stop using it immediately and check whether the equipment is damaged. If necessary, professional maintenance personnel should be contacted in time for processing. When the jack is not used for a long time, it should be stored in a dry, ventilated place away from direct sunlight and humid conditions. At the same time, the jack should be inspected and maintained regularly to ensure that it is in good condition.

4. Suggestions for safe use
When using the jack, you should wear protective equipment, such as gloves, safety shoes, etc., to prevent injuries during operation. When lifting heavy objects, make sure there are no people or obstacles around to avoid collision or crushing accidents during the lifting and lowering of the jack. Personnel operating jacks should have certain knowledge of mechanical operation and safety awareness, and be familiar with the working principles and correct operation methods of jacks. For those who are not familiar with the operation, they should operate under the guidance of professionals.
Proper operation of the OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK is key to ensuring its safe use. During use, be sure to follow correct operating procedures and precautions to maintain the stability and safety of the equipment. At the same time, regular inspection and maintenance of equipment is also an important guarantee for extending the service life of equipment and ensuring smooth work.

How to ensure stability and accuracy when using oy132b-32ton-hydraulic-car-bottle-jack for lifting operations?

When using OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK for lifting operations, it is crucial to ensure stability and accuracy. This is not only related to the safety of operation, but also directly related to the service life and work efficiency of the equipment.

1. Preparation
Check the equipment status: Before operation, first conduct a comprehensive inspection of OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK. Check whether the hydraulic jack is damaged, cracked or leaking, and make sure the oil seal is intact and free of oil stains. At the same time, check whether the handle is flexible and free of stagnation.
Choose the appropriate lifting point: Choose the appropriate lifting point based on the weight and structure of the vehicle. The lifting point should be strong, flat, and able to withstand the force exerted by the jack. Avoid lifting in weak or uneven locations to prevent the vehicle from sliding or deforming.
Prepare safety equipment: Before operation, prepare safety equipment, such as safety brackets, anti-slip mats, etc. Safety brackets can be used to support the vehicle during lifting to prevent accidental falls; anti-slip mats can be placed between the jack and the ground to increase stability.

2. Operation process
Place the jack stably: Place the OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK stably under the selected lifting point, ensuring that the jack base is in close contact with the ground without shaking. At the same time, align the top of the jack with the lifting part of the vehicle to ensure the accuracy of force transmission during the lifting process.
Slow lifting: When operating the handle, maintain a smooth and slow force to avoid rapid pressurization that may cause the vehicle to shake or the jack to overload. During the lifting process, pay attention to the reaction of the vehicle and the status of the jack to ensure that everything is normal.
Use safety brackets: When the vehicle is lifted to a certain height, safety brackets should be used to support the vehicle to reduce the burden on the jack and improve safety. The safety bracket should be placed in a sturdy location on the bottom of the vehicle to ensure stable support.

3. Precautions
Avoid overloading: When using OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK, be sure to pay attention to its load-bearing capacity. Do not overload it to avoid damage to the jack or safety accidents.
Keep it clean: During operation, the jack and surrounding environment should be kept clean. Prevent oil dirt, debris, etc. from entering the inside of the jack and affecting its normal operation.
Pay attention to the oil temperature: Hydraulic jacks generate heat when working, causing the oil temperature to rise. During operation, attention should be paid to changes in oil temperature to avoid oil deterioration or leakage caused by excessive oil temperature.
Follow the operating procedures: When operating OY132B-32TON-HYDRAULIC-CAR-BOTTLE-JACK, you should strictly follow the operating procedures. Do not change the operating steps or usage methods at will to ensure the accuracy and safety of the operation.